George Mason University Routing Network of Cisco Packet Tracer Lab Report

IT 341

undefined

Skills Exam II

undefined

Instructions:

undefined

You have been provided with the required addressing table and network topology in a pkt file. Follow the instructions and

undefined

Deliverables:

undefined

Zipped folder containing:

undefined

Device

Interface

IP Address

Subnet Mask

Default Gateway

R1

Gi0/0

11.11.11.1

255.255.255.0

NA

S0/0/0

14.14.14.1

255.255.255.252

NA

S0/0/1

12.12.12.1

255.255.255.252

NA

R2

S0/0/0

23.23.23.1

255.255.255.252

NA

S0/0/1

12.12.12.2

255.255.255.252

NA

R3

Gi0/0

33.33.33.1

255.255.255.0

NA

S0/0/0

23.23.23.2

255.255.255.252

NA

S0/0/1

34.34.34.1

255.255.255.252

NA

R4

Gi0/0

44.44.44.1

255.255.255.0

NA

S0/0/0

14.14.14.2

255.255.255.252

NA

S0/0/1

34.34.34.2

255.255.255.252

NA

PC1

NA

11.11.11.2

255.255.255.0

11.11.11.1

PC3

NA

33.33.33.2

255.255.255.0

33.33.33.1

PC4

NA

44.44.44.2

255.255.255.0

44.44.44.1

undefined

Task 1: Configure Basic Device Settings (10 Points)

undefined

Step 1: Setup host name for the routers as given in the topology.

undefined

Step 2: Setup enable password: class

undefined

Step 3: Setup line console password: cisco

undefined

Task 2: Configure and verify OSPF Routing (40 Points)

undefined

Step 1: Configure OSPF as the routing protocol on all four routers and advertise the appropriate networks using the network statement. (hint: determine the connected networks for each router and advertise them through OSPF.) You need to use PROCESS ID: 100 and Area: 0 in your OSPF configurations. (15 points)

undefined

Step 2: Prevent routing updates on the interfaces of R1 on which routing advertisements are not required. (hint: you should use passive-interface command for the LAN interface.) (10 points)

undefined

Step 3: Verify that OSPF is running on the routers. Which command would you use to confirm that OSPF is running? (10 points)

undefined

Step 4: Examine the routing tables on all routers. What command should you use to examine the routing table content? (5 points)

undefined

Task 3: Configure Static Routing (30 Points)

undefined

Step 1: From R4 OSPF configuration, remove the LAN network 44.44.44.0/24.(5 points)

undefined

Step 2: Configure static routes on R1 and R2 to reach to network 44.44.44.0/24 with S0/0/0 as the next hop. (10 points)

undefined

Step 3: Configure static route on R3 to reach to network 44.44.44.0/24 with S0/0/1 as the next hop. (5 points)

undefined

Step 4: Verify the routing configuration by viewing the routing tables of R1, R2 and R3. How can you confirm from the routing tables that all static routes have been added correctly? (10 points)

undefined

Task 4: Saving your Configurations and Restart the Devices (5 Points)

undefined

  • Save your configuration by using the proper save command on the routers. Now, click on ‘Power Cycle Devices’ to restart the network. Please make sure to save your configuration before restarting your devices.

undefined

Task 5: Verify Connectivity (15 points)

undefined

  • To verify connectivity, you should be able to ping between all the devices.

undefined

From

To

Fail/Pass

PC1

PC3

PC1

PC4

PC3

PC4

Don't hesitate - Save time and Excel

Are you overwhelmed by an intense schedule and facing difficulties completing this assignment? We at GrandHomework know how to assist students in the most effective and cheap way possible. To be sure of this, place an order and enjoy the best grades that you deserve!

Post Homework
Top